GUIDES · FOOD COST

400 g went in.
340 g came out.

Where the money goes between the delivery and the plate – and how to work out what a portion really costs, with a calculator at the end.

By Jan Ptak · 8 November 2026 · about 6 minutes

I weighed a steak before trimming and cooking: 400 g. On the plate: 340 g. Nothing was thrown away by mistake – fat, sinew and water simply went. But if the dish is costed on the 340 g that is served, the menu price is built on a portion that is cheaper than the one you actually buy.

At an example price of £32 a kilo, the difference is £1.92 on every steak. At 100 portions a month, that is about £2,300 a year that never shows on a costing sheet – on one dish.

Three numbers worth knowing for every dish

  1. Yield – how much of what you buy reaches the plate.
  2. True cost per portion – what the portion costs counting the loss.
  3. GP – what is left of the selling price, without VAT, after the food.
Yield = weight served ÷ weight bought
400 g → 340 g = 85 %
True cost per portion = weight bought × price per kg
0.400 kg × £32 = £12.80 (not 0.340 × £32 = £10.88)
GP % = (price without VAT − true cost) ÷ price without VAT
£28 on the menu ÷ 1.2 = £23.33 without VAT → (23.33 − 12.80) ÷ 23.33 = 45 %

Costed on the served weight, the same steak would seem to make 53 %. Eight points of GP that only exist on paper.

Where the loss hides

  • Trimming – fat, bone, skin, peel, outer leaves.
  • Cooking – water and fat lost in the pan, the oven or the fryer.
  • Portioning – a generous hand adds 10–20 g to every plate.
  • Waste – what is dropped, burnt, returned or goes out of date.

The first two are normal and can be measured once. The last two change from shift to shift – they need recording, not a one-off measurement.

How to measure it in a week

  1. Pick the five dishes that sell the most.
  2. Weigh the raw ingredient before preparation, then the portion as it goes on the plate.
  3. Do it three times on different days and take the average.
  4. Put the yield into the costing of each dish, and check the menu price against your GP target.
  5. Weigh again when a supplier or a product changes – a different cut gives a different yield.

GP calculator: work out your own dish

Put in your own figures. Nothing you type leaves this page.

Yield–
True cost per portion–
Cost if counted on the served weight–
Hidden in a year–
GP – true–
GP – as it looks on paper–

Prices in the example are illustrative – use your supplier's. Food served to eat in is normally standard-rated for VAT (20 %); check your own case with HMRC or your accountant.

What PUBS does with this

In PUBS the loss is part of the recipe: for each ingredient the kitchen records how much is taken and how much is lost, so the cost of a dish is the true one from the start. When a delivery comes in at a new price, PUBS recalculates the dishes and tells the owner which ones have fallen below the GP floor he set. It does not do the weighing for you – someone still has to put the steak on the scales.

Ask how it would work in your kitchen ↗